Phone
+8615093226588
Copolymer coated steel tape consists of steel tape coated on one side or both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density poly-ethylene. It bonds to low, LLDPE, MDPE and HEPE. The steel is low carbon electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.
Copolymer coated steel tape consists of steel tape coated on one side or both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density poly-ethylene. It bonds to low, LLDPE, MDPE and HEPE. The steel is low carbon electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.
Water Resistance 68 deg C/168 hrs, Peel Strength 68℃N/cm≥6.13ASTM B736
Property | Unit | Values | Method | |
Color | Natural or Green | |||
Thickness | Steel | 0.15 / 0.20 | mm | |
EAA | 0.05 | mm | ||
Tensile Strength | MPa | ≥300 | ASTM E8 | |
Elongation | % | ≥15 | ASTM E8 | |
Peel strength | N/cm | ≥6.13 | ASTM B736 | |
Heat Seal strength | N/cm | ≥17.5 | ASTM B736 | |
Corrosion resistance | Grade | 7 | ——- | |
Filler / Flood Resistance 68 deg C/168 hrs | ——- | No Delamination | PEA PE-39, PE-89 | |
Water Resistance 68 deg C/168 hrs, Peel Strength 68℃ | N/cm | ≥6.13 | ASTM B736 | |
Dielectric Strength Two-Side, DC 1Kv, 1min | ——- | No Break | ——- |
Inner Diameter | Width | Outer Diameter | Roll core material |
76/150/406mm | 10mm-1000mm | Customized | paper/steel/plastic cire |
Keep the warehouse clean. Avoid exposure to direct sunlight, pollution and all damage cuased by external forces.
Skilled operators should take or lay the materials gently, avoid scrap and crash problems.
The above mentioned data sheet should, however, only be regarded as a general guide to product properties and not as a guarantee. Some of the properties can be changed as a result of our efforts to improve the quality of our products. All listed test method is just for reference, actual test performed according to modified equipment and conditions.
Q: Are you Trading company or Manufacturer ?
A: We are manufacturer(Factory) in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 8, 500 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Canada etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: Can you accept the special order as per customer offering drawing?
A: Yes,we can.OEM is available.we can customized according to requirement.
Q: What kind of payment does your company support?
A: T/T,L/C at sight,Cash,Western Union are all accepted
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample within 2kg for free charge but do not pay the cost of freight.
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.
If you have another question, pls feel free to contact us as below:
Contact: Tel/(wechat):+8613938576991 whatsapp:+8613938576991 Email: [email protected]
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!