Phone
+8615093226588
- E-mail sale@steelwirefactory.com
- Whatsapp +8615093226588
Galvanized Steel Wire Strand
Galvanized Steel Wire Strand
Galvanized Wire Strand is made to ASTM B498; ASTM A 475; BS 183 etc. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for cable application is available in a Class A coating; Class B coating and Class C coating.
Product Description
Galvanized Steel Wire Strand
Galvanized Wire Strand is made to ASTM B498; ASTM A 475; BS 183 etc. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for cable application is available in a Class A coating; Class B coating and Class C coating.
Class A coatings are smoother, however less corrosion resistant than heavy galvanized coatings and are often used in normal wire working applications. Some typical end users include cages, bucket handles, coat hangers and baskets.
Class B and Class C coatings are used in conditions where atmospheric corrosion is severe. End users include crop support wires where chemicals are used, pool fencing or chain mesh in coastal areas.
Additional Info
Diameter Range of steel wire: 1.57 -4.00 mm
Galvanised Wire Working Specifications
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.
| Nominal Diameter | Minimum Coating Mass (g/m2) | ||
| Class A | Class B | Class C | |
| over 1.6 mm up to and incl. 1.90mm | 210 | 420 | 630 |
| over 1.90mm up to and incl. 2.30mm | 220 | 440 | 660 |
| over 2.30mm up to and incl. 2.70mm | 230 | 460 | 690 |
| over 2.70mm up to and incl. 3.10mm | 240 | 480 | 720 |
| over 3.10mm up to and incl. 3.50mm | 260 | 520 | 780 |
| over 3.50mm up to and incl. 3.90mm | 270 | 540 | 810 |
| Nominal Diameter | Structure | |||
| over 1.6 mm up to and incl. 1.90mm | 1*3 | 1*7 | 1*19 | 1*37 |
| over 1.90mm up to and incl. 2.30mm | 1*3 | 1*7 | 1*19 | 1*37 |
| over 2.30mm up to and incl. 2.70mm | 1*3 | 1*7 | 1*19 | 1*37 |
| over 2.70mm up to and incl. 3.10mm | 1*3 | 1*7 | 1*19 | 1*37 |
| over 3.10mm up to and incl. 3.50mm | 1*3 | 1*7 | 1*19 | 1*37 |
| over 3.50mm up to and incl. 3.90mm | 1*3 | 1*7 | 1*19 | 1*37 |
Tensile Strength (Mpa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
| Nominal Wire Diameter | Stress at 1% Elongation (Mpa) | |||
| Class A | Class B | Class C | Extra-High | |
| over 1.6 mm up to and incl. 2.30mm | 1310 | 1240 | 1170 | 1560 |
| over 2.30mm up to and incl. 3.05mm | 1280 | 1210 | 1140 | 1560 |
| over 3.05mm up to and incl. 3.60mm | 1240 | 1170 | 1100 | 1560 |
| over 3.60mm up to and incl. 4.80mm | 1170 | 1100 | 1070 | 1560 |
| Nominal Wire Diameter | Tensile Strength (Mpa) | |||
| Class A | Class B | Class C | Extra-High | |
| over 1.6 mm up to and incl. 2.30mm | 1450 | 1380 | 1310 | 1770 |
| over 2.30mm up to and incl. 3.05mm | 1410 | 1340 | 1280 | 1770 |
| over 3.05mm up to and incl. 3.60mm | 1410 | 1340 | 1280 | 1770 |
| over 3.60mm up to and incl. 4.80mm | 1380 | 1280 | 1240 | 1770 |
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
| Nominal Wire Diameter | 10in Elongation (%) | ||
| Class A | Class B | Class C | |
| over 1.6 mm up to and incl. 2.30mm | 3 | 3 | 3 |
| over 2.30mm up to and incl. 3.05mm | 3.5 | 3 | 3 |
| over 3.05mm up to and incl. 3.60mm | 4 | 3 | 3 |
| over 3.60mm up to and incl. 4.80mm | 4 | 4 | 4 |
Steel Chemistry
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
| Tensile Grade | % Carbon | % Phosphorus | % Manganese | % Silicon | % Sulphur |
| Normal | 0.5~0.85 | 0.035 | 0.5 ~1.10 | 0.10~0.35 | 0.045 |
Packing:
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.
FAQ
Q: Are you Trading company or Manufacturer ?
A: We are manufacturer(Factory) in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 8, 500 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Canada etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: Can you accept the special order as per customer offering drawing?
A: Yes,we can.OEM is available.we can customized according to requirement.
Q: What kind of payment does your company support?
A: T/T,L/C at sight,Cash,Western Union are all accepted
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample within 2kg for free charge but do not pay the cost of freight.
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.
If you have another question, pls feel free to contact us as below:
Contact: Tel/(wechat):+8613938576991 whatsapp:+8613938576991 Email: zhiyitian2008@gmail.com
Have Any Question?
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!