Submarine Galvanized Steel Wire

Submarine Galvanized Steel Wire


Galvanized Wire is made to AS/NZS 4534 "Zinc and zinc/ aluminium-alloy Coatings on Steel Wire"; BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for general manufacturing purposes is available in a standard galvanized coating or a heavy galvanized coating.


Product Description

Submarine Galvanized Steel Wire

Galvanized Wire is made to AS/NZS 4534 “Zinc and zinc/ aluminium-alloy Coatings on Steel Wire”; BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for general manufacturing purposes is available in a standard galvanized coating or a heavy galvanized coating.

Standard galvanized coatings are smoother, however less corrosion resistant than heavy galvanized coatings and are often used in normal wire working applications. Some typical end users include cages, bucket handles, coat hangers and baskets.

Heavy galvanized coatings are used in conditions where atmospheric corrosion is severe. End users include crop support wires where chemicals are used, pool fencing or chain mesh in coastal areas.

Additional Info

Diameter Range: Std. Gal. 0.15-8.00 mm

Diameter Range: Heavy Gal 0.90-8.00 mm

Surface Finish: Standard & Heavy Galvanized

Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.

Nominal Diameter Minimum Coating Mass (g/m2)
Standard Galv. Heavy Galv. Extra-high Galv.
over 0.15mm up to and incl. 0.50mm 15 30
over 0.5mm up to and incl. 0.75mm 30 130
over 0.75mm up to and incl. 0.85mm 25 130
over 0.85mm up to and incl. 0.95mm 25 140
over 0.95mm up to and incl. 1.06mm 25 150
over 1.06mm up to and incl. 1.18mm 25 160
over 1.18mm up to and incl. 1.32mm 30 170
over 1.32mm up to and incl. 1.55mm 30 185
over 1.55mm up to and incl. 1.80mm 35 200 480
over 1.80mm up to and incl. 2.24mm 35 215 485
over 2.24mm up to and incl. 2.72mm 40 230 490
over 2.72mm up to and incl. 3.15mm 45 240 500
over 3.15mm up to and incl. 3.55mm 50 250 520
over 3.55mm up to and incl. 4.25mm 60 260 530
over 4.25mm up to and incl. 5.00mm 70 275 550
over 5.00mm up to and incl. 8.00mm 80 290 590

Diameter Properties

Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:

Nominal Wire Diameter Tolerance (mm)
over 0.80mm up to and incl. 1.60mm +/-0.03
over 1.60mm up to and incl. 2.50mm +/-0.03
over 2.50mm up to and incl. 4.00mm +/-0.03
over 4.00mm up to and incl. 6.00mm +/-0.04
over 6.00mm up to and incl. 8.00mm +/-0.04

Heavy Galvanized Wire is manufactured to comply with the following diameter tolerances:

Nominal Wire Diameter Tolerance (mm)
over 0.80mm up to and incl. 1.60mm +/-0.04
over 1.60mm up to and incl. 2.50mm +/-0.04
over 2.50mm up to and incl. 4.00mm +/-0.04
over 4.00mm up to and incl. 5.00mm +/-0.05
over 5.00mm up to and incl. 6.00mm +/-0.05
over 6.00mm up to and incl. 8.00mm +/-0.05

Tensile Strength (Mpa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

Grade Tensile Strength (Mpa)
Galvanised – Soft Quality 380/550
Galvanised – Medium Quality 500/625
Galvanised – Hard Quality 625/850

Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.

Steel Chemistry

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

Tensile Grade % Carbon % Phosphorus % Manganese % Silicon % Sulphur
Soft 0.05 max 0.03 max 0.05 max 0.12-0.18 0.03 max
Medium 0.15-0.19 0.03 max 0.70-0.90 0.14-0.24 0.03 max
Hard 0.04-0.07 0.03 max 0.40-0.60 0.12-0.22 0.03 max

FAQ

Q: Are you Trading company or Manufacturer ?

A: We are manufacturer(Factory) in wire industry for more than 20 years.

Q: Producing Capacity?

A: The producing capacity totally is 8, 500 tons per month. The producing capacity of this product is 1,500 tons per month.

Q: Main Market?

A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Canada etc.

Q: What information should I provide when inquiring?

A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour

Q: What is the MOQ?

A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.

Q: Can you accept the special order as per customer offering drawing?

A: Yes,we can.OEM is available.we can customized according to requirement.

Q: What kind of payment does your company support?

A: T/T,L/C at sight,Cash,Western Union are all accepted

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample within 2kg for free charge but do not pay the cost of freight.

Q: Third Party Inspection available?

A: Yes, available. The charges are on the buyer.

If you have another question, pls feel free to contact us as below:

Contact: Tel/(wechat):+8613938576991 whatsapp:+8613938576991 Email: zhiyitian2008@gmail.com



Have Any Question?

Please Leave your message you want to know! We will respond to your inquiry within 24 hours!